Provides alternating bilateral stimulation (ABS) for doing the DNMS or EMDR therapy. It consists of a control box connected to two small (hand-holdable) pulsers by six-foot wires. The pulsers vibrate in an alternating fashion to provide a gentle tactile stimulation, which many find soothing and relaxing. The stimulation is comparable to the vibration of a pager or cell phone. There is a one year warranty on the control box and pulsers.
Never again send your tactile stimulation device in for repair when a wire breaks. When a wire wears out, just unplug it from the control box and pulsers, and replace it! Your TheraTapper™ kit comes with a spare wire.
2.4″ x 1.25″ x 0.6″ oval pulsers fit nicely into hands.
Provide real-time visual feedback about pulse length and rate.
Controls the the length of each pulse. The longer the pulse, the slower the speed. The shorter the pulse, the faster the speed.
Controls the intensity of each pulse by adjusting the amount of current behind each pulse.
Controls the length of the pause between pulses. The no-pause setting is the fastest. Lengthening the pause also slows the speed. Competition doesn’t have this!
Get over 100 hours of tapping on one pair of AA alkaline batteries, or use rechargeable batteries.
Each TheraTapper™ includes everything you see here: The control box, pulsers, two sets of wires, and a vinyl zipper pouch. Batteries are included, so all you need to do is connect the wires and turn it on. Cost $115.00.
Eventually, the wires will wear out and need to be replaced. Your kit comes with an extra set of wires, so you will have a spare on hand. A typical symptom of a failing wire is that one pulser will not work. You can order replacement wires from us, or you can sometimes find them in an electronics store. They are standard audio cables. However, be sure to take your pulsers with you to be sure the plugs will fit. If you order from us, a package of 2 will cost $16.00.
The Pulser Set consists of a pair of pulsers and two wires. These are recommended for anyone who travels a lot or lives outside the US, to ensure they have spare parts on hand in a timely fashion. Our pulser sets can also be used on other manufacturers’ tactile systems.
Some clients prefer to have a set for their exclusive use. You or your client can buy the pulser set. Each pulser set costs $44.00.
The most common reason for replacing Pulsers is loss or catastrophic damage, such as from being used as a chew toy, or getting wet. A pair costs $30.00.
Rarely does a TheraTapper™ need to be thrown away! If something breaks or doesn’t behave as you think it should, call us! Or, check our troubleshooting page. If there is a problem with the control box, it can probably be repaired. The most common issues are broken switches, and broken or corroded battery clips. For other problems, we can usually address the issue over the phone or by sending you replacement parts, so please call before sending in your TheraTapper™ for repair.
Contact us if you have any questions about operating your TheraTapper™. We’ll help you any way we can.